Sunday, February 7, 2016

New Forms for ATM Card/E Banking/Mobile Banking and Customer Information Updation

Revised forms for ATM/ eBanking / Mobile Banking

There are three situation which has to be faced in CBS Post office.
  1. ATM Card/e-Banking/Mobile Banking Request Form for existing customers migrated to CBS.
  2. ATM Card/e-Banking/Mobile Banking Request Form for existing customers who have opened accounts after migration to CBS.
  3. Customer Information Updtation Form for existing customers.
It is requested that as and when any customer will ask for issue of ATM Card or E-Banking/Mobile Banking facility, form mentioned at Sl. No.1 should be used for those who were already having Savings Account before migration to CBS and this form alongwith KYC Document is to be sent to CPC for scanning and uploading of latest Signatures, Photograph and KYC documents. CPC will return these Forms to Post Offices concerned in a separate packet and post offices should file these forms (date-wise) in a separate Guard File named as "Channel Request Forms File". 

If any customer who opened savings account after migration to CBS applies for ATM Card, E banking/Mobile Banking, Form mentioned at Sl.No.2 should be used and this form need not to be sent to CPC but should be filed in the same guard file named " Channel Request Forms". 

If any customer either old or new, want to update its KYC information, Form mentioned at Sl. No. 3 should be used and if signatures or photograph is to be updated, form should be sent to CPC and CPC will upload this form and return to post office concerned. For this purpose also, a separate guard file is to be maintained with name" Customer Information Updation File". In other cases, post office should not send this form to CPC but file locally in the same guard file.

It is requested to start a drive for updation of Customer Information of the existing customers and CBS post offices should always remember that any Modification in CIF has to be verified by Supervisor and only after verification, modification will be updated in Finacle and if it is not verified, it will block EOD.

Download New revised form


DNS Flushing technique to boost up DOP Finacle speed

What does DNS flushing do?

Whenever you type a URL on the address bar it fetches the corresponding IP address to communicate with web server (it might be any kind of server). When you repeatedly use a same URL its just a waste of network resource to fetch corresponding IP address every time because IP don't change too often. 

So your computer stores the combinations of domain name and its IP in local cache to avoid fetching from Domain name System(DNS) every time you use same domain name(URL). 

It also holds another crucial info called "Timeout" which says about the valid time for the IP and domain name combination, when this time times out your computer re-fetches the combination from DNS and stores in local cache again. 

DNS flushing is the mechanism where the user can manually make all the entries in the cache invalid, so your computer re-fetches new combinations by now on whenever it needs and stores in local 
Enough theory, let us do some practical 
  • First click Windows+R keys in your key board.(Ref the image given below) 

Type the following command and press Enter: 
ipconfig /flushdns 
If the command was successful, you will see the following message: 

Now start a new session in Finacle and see the magic.It will be faster than previous session. This technique is useful in afternoon when the Finacle shows sluggish behaviour.

Courtesy : http://dopfinacle.blogspot.in/

Procedure for giving the IR entry in DOP Finacle

Procedure for giving the IR entry in DOP Finacle

  • Generally we give IR entry for excess/short amount  in DOP 
  • For IR entry in DOP Finacle there is a menu HIARM which is accessible only to SBCO Supervisor role only.
  • Generally IR entry can be of two types i.e., Debit entry or Credit entry for a particular account.
  • In General we will give IR entry for SB and PPF accounts in DOP.

What is a Credit Entry ?

  • In general if the balance credited to the customer is less than the actual balance then we have to give the credit to that particular account which is known as Credit Entry.
  • We generally face this situation if there is a missing credit for a particular account then the IBB calculation also goes wrong hence results in balance difference.
  •  For this situatuation we will calculate IR (Interest Rectification) i.e., Credit entry should be made for that particular account.

What is a Debit Entry ?

  • In general if the balance credited to the customer is more than the actual balance then we have to give debit entry to that particular account which is known as Debit Entry.
  • We generaly face this situation if there is excess deposit for a particular account then the IBB calculation also goes wrong hence results in balance difference.
  • For this situation we will calculate IR i..e, Debit entry should be made for that particular account.

Step by Step Procedure of giving an IR entry in DOP Finalce

  • .The menu option used for giving an IR entry is HIARM which is given only to SBCO supervisor role in DOP Finacle.
  • HIARM stands for Interest Adjustment Register Maintainance.
  • Invoke the menu HIARM then the system will show the below screen as mentioned in the below screen shot.


Then in the above screen enter the following details mentioned below

  1. Select the filed Function as "ADD"
  2. Select the field A/c/Bill/Disbursement as "A-A/cs"
  3. Enter the filed A/c /Bill/Disbursement ID as "Account number of the customer" then the system auto fills the SOL ID field as mentioned in the below screen shot.

 Then click on GO then the system will show the below screen shot as mentioned 




Then in the above screen enter the following details as mentioned below 

  • Enter the field Adjusted amount as " enter the amount"
  • Select the Debit/Credit Interest as "Debit/Credit" depends on the requirement.
  • Select the Run Indicator field as "Debit/Credit" depends on the requirement.
  • Enter the field Applicable From Date as "01/04/xxxx" (Start date of the Financial Year).
  • Enter the remarks field as "IR entry for FY "  as mentioned in the below screen shot



Then click on Submit then the system will show the message "request submitted successfully"


Note:- IR entry added in the above mentioned steps will not effect in the ledger immediately i..e, debit or credit entry made using HIARM will effect during next interest calculation or during closure which ever is earlier.

Courtesy : http://pofinacleguide.blogspot.in/

Internet Explorer Cannot display the webpage while run the Finacle

We have been facing slowness and "Internet Explorer Cannot display the web page" error from last week like below screen shoot.
Apply the below solution mentioned in this post to overcome the slowness and Page cannot displayed issues.
  • Open Internet Explorer
  • Click on Tools.
  • Select Internet Explorer.

  • The next screen will be displayed as
  • Click on Advacned TAB
  • Click on Restored Advacned Settings. 
  • Click on Reset button.
  • Then Click OK.
  • Now Click once again on Tools button.
Do the setting of Pop-Up Blocker and select pop-up settings.
  • Give the Finacle URL and click Add button.
  • Close the window.
  • Once again Click the Tool 
  • Select Compatible View Setting.
  • Add indiapost.gov.in as given in scren shoot.
  • Now close the internet explorer.
  • Open the internet explorer with Finacle URL and see the magic.
Courtesy :  dopfinacle.blogspot.in

Tool for Mapping Old to New A/c Number in Finacle

Steps :
  • Download "Nrega_Finacle_Account_Mapping.xls" received with Load Layer report from DMCC
  • Copy the entire sheet in Master_data sheet of this excel file
  • Now enter old SB Account number or paste the list to obtain new finacle number

Download and Extract Tool then follow the above steps to map New account number with Old Account Numer.
Download  Finacle Account Mapping Tool using below link

Thanks Ketan Joshi System Administrator Banaskantha Dn.Palanpur-385001

Procedure to inquire paid transactions for MIS/SCSS/TD accounts in DOP Finacle

Procedure to inquire paid transactions for MIS/SCSS/TD accounts in DOP Finacle

  • For all the accounts of SBA scheme i..e, SB/PPF/SSA accounts we will inquire the ledger details and ledger balance using the menu HACLI(Account Ledger Inquiry).
  • But for TDA accounts i..e., MIS,SCSS and TD accounts we can't trace the total installments paid to the customer using the menu HACLI as these accounts interests will be credited in respective Sundry accounts ( Unposted Office Account).
  • For MIS,SCSS and TD accounts interests of the customers will be credited in respective sundry accounts i..e,
For MIS accounts Sundry account is SOLID+0337.
For SCSS accounts Sundry account is SOLID+0338.
For TD accounts Sundry account is SOLID+0335.
Generally in DOP Finacle we will reverse the amount i..e, customer interest from the Sundry account by giving the reference number (customer account number) which is called pointing account hence Sundry accounts comes under OAP(Office Account Pointing).

Procedure to Inquire paid transactions for MIS/SCSS/TD accounts

1. Invoke the menu HFTI then the system will show the below screen as mentioned

In the above screen enter the following details as mentioned below

  1. Enter the account number as Sundry account number (i..e., SOLID+0335/0337/0338).
  2. Enter the Ref. No. column as " Customer account number " as mentioned in the below screen shot

Then in the above screen remove the start date column to view the total number of installments paid to the customer after migration to Finacle application as shown in the below screen

Then finally Click on Go then the system will show the list of transactions paid to the customer as mentioned in the below screen shot.
  • In the above screen one can observe transaction starting with 'S' are system generated i.e., interest generation date by the system( generally interest due date).
  • And the transactions starting with 'IN' are the entries which are paid to the customer.
Courtesy : http://dopfinacle.blogspot.in

Error while modifying SB account from Dormant to Active- Account combination already exists in DOP Finacle

We generally do the modification of SB accounts using the menu CASBAM for Dormant accounts.
Some times when we try to modify the account from Dormant to Active system will throw an error "Account Combination already exists".

Cause:

1.If for a particular CIF id the customer has two accounts i..e, one is single account and the other is joint account and if suppose one of the account is active and other one is dormant then this issue arises.
2.For example:- If CIF id of the customer is 123456789 then if he is having two SB accounts for the same CIF ( one account is single account and other is joint account) and say account X is active and other Y is dormant. In this scenario the above said problem arises.
3.For a particular CIF if we want to lnow the number of accounts then the user can view the report using the menu HCRV.

Solution:

  1. After noting the account numbers using the menu HCRV inquire the status of both the accounts one will be in active condition and other one will be in Dormant state
  2. In order to view the status of the account use the menu HACCDET.
  3. Now make the Active account to Dormant account by using the menu CASBAM submit and verfiy.
  4. In the next step make the both accounts as Active submit and verify.